Change DNS Settings on an Element Smart TV - How to do it ?
Smart TVsShould the need arise to update the DNS server settings on your Element Smart TV, this guide by Fixwebnode is here to guide you through the process with step-by-step instructions.
Changing these settings could increase the quality of the streaming content over the internet, as well as troubleshoot potential problems.
Table of contents [Show]
How to Change DNS Settings on an Element Smart TV ?
1. Press MENU on your remote control to access the main interface.
2. Navigate to TV SETTINGS and highlight by using the arrow buttons.
3. Then, press OK to confirm.
4. Now, use the same arrow buttons to move onto NETWORK and press OK once again.
Next, select IP Address before writing down the following information:
- The current IP Address. (i.e. 192.168.0.15).
- The current Default Gateway. This should only be slightly different than the IP address. (i.e. 192.168.0.1).
5. Choose Lan and press the left and right arrow keys until Manual Get IP is highlighted and Selected. Then, Click OK.
6. Provide the below information:
- For IP Address: Enter the IP Address you recorded earlier. (i.e. 192.168.0.15)
- For Default Gateway: Enter the Default Gateway you recorded earlier. (i.e. 192.168.0.1)
- For Subnet Mask: 255.255.255.0
- For DNS Server: This field can be changed to the desired DNS address settings you wish to use.
Your Element Smart TV will now use the DNS server you specified.
Popular DNS Servers
Here are some popular DNS servers that you can use:
- Google DNS: 8.8.8.8 and 8.8.4.4
- Cloudflare DNS: 1.1.1.1 and 1.0.0.1
- OpenDNS: 208.67.222.222 and 208.67.220.220
Note: If you change your DNS settings and you are unable to connect to the internet, you can reset your Element Smart TV's network settings to the default.
How to reset your Element Smart TV's network settings ?
To do this, follow these steps:
- Turn on your Element Smart TV and press the Menu button on your remote control.
- Use the arrow buttons on your remote to select Settings, then press OK.
- Use the arrow buttons to select Network, then press OK.
- Select Reset Network, then press OK.
- Select Yes to confirm.
Your Element Smart TV will reset its network settings and you will be able to connect to the internet using the default DNS servers.
Conclusion
Now you have learnt that Changing your Element Smart TV's DNS settings is an easy process and can have benefits like faster streaming, improved connectivity, and enhanced security.
By default, your TV uses your router's DNS servers, but switching to public servers like Google Public DNS or OpenDNS can make a difference in performance and reliability.
Therefore, If you've been experiencing buffering, lag, or other issues with your Element TV, a simple DNS change could help fix the problem. And using reliable public DNS servers helps protect against DNS hijacking and other vulnerabilities.
So take a few minutes to update the settings on your TV, try out the new DNS servers for a while, and you may just notice a big improvement in your overall viewing experience.
